- You are here:
- Simple Key
- Grass-like plants
- True grasses
- Agrostis stolonifera
Agrostis stolonifera — creeping bentgrass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Creeping bentgrass is commonly thought to be native to Europe, Asia and North Africa and introduced to North America, but some evidence indicates that native populations may exist in North America. It is introduced throughout New England, where it grows in sites subject to seasonal or temporary flooding.
Habitat
Anthropogenic (man-made or disturbed habitats), brackish or salt marshes and flats, marshes, meadows and fields, shores of rivers or lakes, wetland margins (edges of wetlands)
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
-
- aquatic
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 2–5 mm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Spikelet length
- 2–3.5 mm
- Glume relative length
- both glumes are as long or longer than all of the florets
- Awn on glume
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0–1 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 0.7–7.5 mm
- Anther length
- 0.9–1.4 mm
-
Flowers
- Anther length
- 0.9–1.4 mm
- Anther number
- 3
- Awn on glume
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0 mm
- Glume keel
-
- the glume keels are rough or hairy
- the glume keels are smooth and hairless
- Glume relative length
- both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
- 1
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch length
- 2–6 cm
- Inflorescence branch roughness
- the inflorescence branches are somewhat to very rough
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Inflorescence branches coming off the lowest stem node
- 1–7
- Inflorescence crowding
- the panicle is somewhat to very congested (crowded), and the branches may not be clearly seen without close inspection
- Inflorescence length
- 30–200 mm
- Inflorescence length to width ratio
- 3.3–6
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inflorescence width
- 5–60 mm
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- the awn is attached at the upper half of the lemma
- Lemma awn coiled
- the lemma awn is straight or twisted, but not coiled one half turn
- Lemma awn length
- 0–1 mm
- Lemma awn number
-
- the lemma has no awn
- the lemma has one awn on it
- Lemma awn orientation
- the awn of the lemma is straight
- Lemma base hair length
- Up to 0.5 mm
- Lemma base hairs
- the lemma has hairs at the base
- Lemma cross-section
- the lemma is flat or rounded if you cut across the midpoint
- Lemma hairs
- the lemma is hairless between the veins
- Lemma keel hairs
- the keel of the lemma is hairless
- Lemma marginal vein hairs
- the marginal vein of the lemma is hairless
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is a simple point, with or without an awn (long narrow extension ending in a point)
- Lemma tip shape
-
- the lemma tip tapers to a broad point (it may or may not also have an awn or teeth at the tip)
- the lemma tip tapers to a narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
- 5
- Lemma vein orientation
- the veins on the lemma stay roughly parallel throughout
- Lower glume length
- 1.6–3 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea length
- 0.7–1.4 mm
- Palea relative length
- palea is one half to fully as long as lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet axis tip
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off above the glumes, so that after the florets fall off, the glumes remain
- Spikelet length
- 2–3.5 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet pedicel length
- 0.3–3.3 mm
- Spikelet position
- the spikelets emerge from both the upper and lower halves of the inflorescence branches
- Spikelet shape
- the spikelets are lanceolate (lance-shaped, widest below the middle and tapering narrowly to the ends) in profile
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 1.6–3 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
- the upper glume is widest at or below the middle
-
Fruits or seeds
- Seed length
- 0.9–1.3 mm
-
Growth form
- Horizontal rooting stem
- yes
- Lifespan
- the plant lives more than two years
- Rhizomes
- no
- Roots
- there are only slender roots on the plant
-
Leaves
- Basal leaves
- the plant has few or no leaves coming from the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf basal lobe hairy
- NA
- Leaf blade cross-section
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- 2–10 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 2–5 mm
- Leaf ligule length
- 0.7–7.5 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
-
- aquatic
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- brackish or salt marshes and flats
- edges of wetlands
- man-made or disturbed habitats
- marshes
- meadows or fields
- shores of rivers or lakes
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 8–60 cm
- Roots at lower stem nodes
-
- no
- yes
- Stem hairs
- the stem is nearly to completely hairless
- Stem node number
- 2–7
- Stem orientation
- the stems trail at the base, but turn upwards at the tips
- Stem spacing
- the stems grow close together in compact clusters or tufts
Wetland status
Usually occurs in wetlands, but occasionally in non-wetlands. (Wetland indicator code: FACW)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Massachusetts
- unranked (S-rank: SNR)
From Flora Novae Angliae dichotomous key
10. Agrostis stolonifera L. E
creeping bentgrass. Agrostis alba L. var. palustris (Huds.) Pers.; A. alba L. var. stolonifera (L.) Sm.; A. palustris Huds.; A. stolonifera L. var. compacta Hartman • CT, MA, ME, NH, RI, VT. Hydric or temporarily saturated soils of fields, inland and saline marshes, ditches, and shorelines. This species is often considered to be non-native to North American; however, some northern salt marsh and lakeside populations may be native (Harvey 2007).
Native to North America?
No
Sometimes confused with
- Agrostis capillaris:
- ligules 0.5-2 mm long and panicle branches bearing flowers only in distal half (vs. A. stolonifera, with ligules 2-6 mm long and branches of panicle bearing flowers in distal and proximal halves). Agrostis gigantea: stems upright at base and inflorescence usually red-purple with spreading branches during flowering (vs. stems decumbent and inflorescence yellow-brown with ascending branches during flowering).
Synonyms
- Agrostis alba L. var. palustris (Huds.) Pers.
- Agrostis alba L. var. stolonifera (L.) Sm.
- Agrostis palustris Huds.
- Agrostis stolonifera var. compacta Hartman