- You are here:
- Simple Key
- Grass-like plants
- True grasses
- Cinna arundinacea
Cinna arundinacea — sweet wood-reed
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Sweet wood-reed is a tall and attractive grass, and is a good substitute for the invasive Japanese stilt-grass (Microstegium vimineum). The Iroquois used this species as a treatment for diabetes.
Habitat
Floodplain (river or stream floodplains), forests, marshes, shores of rivers or lakes, swamps, wetland margins (edges of wetlands)
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
-
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 3–19 mm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Spikelet length
- 3.5–7.5 mm
- Glume relative length
- both glumes are as long or longer than all of the florets
- Awn on glume
-
- the glume has an awn
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0.2–1.5 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 2–10 mm
- Anther length
- 0.8–1.8 mm
-
Flowers
- Anther length
- 0.8–1.8 mm
- Anther number
- 1
- Awn on glume
-
- the glume has an awn
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0 mm
- Glume keel
- the glume keels are rough or hairy
- Glume relative length
- both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
-
- 1
- 3
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch roughness
- the inflorescence branches are smooth or only slightly rough
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Inflorescence crowding
- the panicle is somewhat to very spread out, with clearly-evident branches
- Inflorescence length
- 65–550 mm
- Inflorescence length to width ratio
- 2.2–8.3
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inflorescence width
- 30–120 mm
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- the awn is attached at the upper half of the lemma
- Lemma awn coiled
- the lemma awn is straight or twisted, but not coiled one half turn
- Lemma awn length
- 0.2–1.5 mm
- Lemma awn number
-
- the lemma has no awn
- the lemma has one awn on it
- Lemma awn orientation
- the awn of the lemma is straight
- Lemma base hair length
- 0 mm
- Lemma base hairs
- the lemma is hairless or feels just a tiny bit rough at the base
- Lemma cross-section
- the lemma is V-shaped if you cut across the midpoint
- Lemma hairs
- the lemma is hairless between the veins
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is split into two or more points
- Lemma tip shape
- the lemma tip tapers to a narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
-
- 3
- 5
- Lower glume length
- 2.7–6.1 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea relative length
- palea is one half to fully as long as lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet axis tip
-
- there is an extension of the spikelet axis beyond the tip of the spikelet
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off below the glumes
- Spikelet length
- 3.5–7.5 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet position
- the spikelets emerge from both the upper and lower halves of the inflorescence branches
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 3.5–7.5 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
- the upper glume is widest at or below the middle
-
Fruits or seeds
- Seed length
- 2.1–2.8 mm
-
Growth form
- Horizontal rooting stem
- no
- Lifespan
- the plant lives more than two years
- Rhizomes
- yes
- Roots
- the plant has rhizomes (horizontal underground stem with roots growing from it)
-
Leaves
- Basal leaves
- the plant has few or no leaves coming from the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf basal lobe hairy
- NA
- Leaf blade cross-section
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- 15–40 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 3–19 mm
- Leaf ligule length
- 2–10 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
-
- terrestrial
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- edges of wetlands
- forests
- marshes
- river or stream floodplains
- shores of rivers or lakes
- swamps
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 28–185 cm
- Roots at lower stem nodes
-
- no
- yes
- Stem hairs
-
- the stem has hairs on it
- the stem is nearly to completely hairless
- Stem node number
- 5–13
- Stem orientation
- the stems are upright
- Stem spacing
- the stems grow close together in compact clusters or tufts
Wetland status
Usually occurs in wetlands, but occasionally in non-wetlands. (Wetland indicator code: FACW)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Massachusetts
- unranked (S-rank: SNR)
- Vermont
- fairly widespread (S-rank: S4)
var. arundinacea
- Massachusetts
- unranked (S-rank: SNR)
From Flora Novae Angliae dichotomous key
1. Cinna arundinacea L. N
sweet wood-reed. Cinna arundinacea L. var. inexpansa Fern. & Grisc. • CT, MA, ME, NH, RI, VT. Riparian forests and terraces, stream banks, open marshes, swamps.
Native to North America?
Yes
Sometimes confused with
- Cinna latifolia:
- upper glume 1-veined and 2.6-4.1 mm long (vs. C. arundinacea, with upper glume 3-veined and 4.1-6.6 mm long).
Synonyms
- Cinna arundinacea var. inexpansa Fern. & Grisc.