- You are here:
- Simple Key
- Grass-like plants
- True grasses
- Phleum pratense
Phleum pratense — common Timothy
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Common Timothy was introduced to the United States in 1720 by Timothy Hansen as a pasture grass. Now it is widespread and sometimes weedy.
Habitat
Anthropogenic (man-made or disturbed habitats), meadows and fields
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
- terrestrial
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 4–10 mm
- Inflorescence branches
-
- the flowers are attached to branches rather than to the main axis of the inflorescence
- there are no branch points between the base of the inflorescence axis and the flowers, or they are not obvious
- Spikelet length
- 2–3 mm
- Glume relative length
- both glumes are as long or longer than all of the florets
- Awn on glume
- the glume has an awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 2–4 mm
- Anther length
- 1.6–2.3 mm
-
Flowers
- Anther length
- 1.6–2.3 mm
- Anther number
- 3
- Awn on glume
- the glume has an awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0.7–1.5 mm
- Glume keel
- the glume keels are rough or hairy
- Glume relative length
- both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
- 3
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis hairs
- the inflorescence axis is hairy but not rough or sand-papery feeling
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch roughness
- the inflorescence branches are smooth or only slightly rough
- Inflorescence branches
-
- the flowers are attached to branches rather than to the main axis of the inflorescence
- there are no branch points between the base of the inflorescence axis and the flowers, or they are not obvious
- Inflorescence crowding
- the panicle is somewhat to very congested (crowded), and the branches may not be clearly seen without close inspection
- Inflorescence length
- 30–160 mm
- Inflorescence length to width ratio
- 5–20
- Inflorescence type (general)
-
- the inflorescence is a spike, or is spike-like, lacking obvious branches
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inflorescence width
- 5–10 mm
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- NA
- Lemma awn coiled
- NA
- Lemma awn length
- 0 mm
- Lemma awn number
- the lemma has no awn
- Lemma awn orientation
- NA
- Lemma base hair length
- 0 mm
- Lemma base hairs
- the lemma is hairless or feels just a tiny bit rough at the base
- Lemma cross-section
- the lemma is flat or rounded if you cut across the midpoint
- Lemma hairs
-
- the lemma has fine hairs between the veins
- the lemma is hairless between the veins
- Lemma keel hairs
- NA
- Lemma marginal vein hairs
- the marginal vein of the lemma is hairless
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is a simple point, with or without an awn (long narrow extension ending in a point)
- Lemma tip shape
- the lemma tip tapers to a narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
- 5
- Lower glume length
- 3–4 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea length
- 1.5–1.8 mm
- Palea relative length
- palea is one half to fully as long as lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet disintegration
-
- the spikelet breaks off above the glumes, so that after the florets fall off, the glumes remain
- the spikelet breaks off below the glumes
- Spikelet length
- 2–3 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet position
- the spikelets emerge from both the upper and lower halves of the inflorescence branches
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 3–4 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
-
Growth form
- Horizontal rooting stem
- no
- Lifespan
- the plant lives more than two years
- Rhizomes
- no
- Roots
- there are only slender roots on the plant
-
Leaves
- Basal leaves
- the plant has few or no leaves coming from the base of the flowering stem
- Leaf auricles
-
- the leaves do not have auricles
- the leaves have auricles
- Leaf basal lobe hairy
- the lobes at the base of the leaf blades are hairless
- Leaf blade cross-section
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- Up to 45 cm
- Leaf blade texture
- the leaf blade is rough and sandpapery
- Leaf blade width
- 4–10 mm
- Leaf ligule length
- 2–4 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
- terrestrial
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- man-made or disturbed habitats
- meadows or fields
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 20–150 cm
- Stem hairs
- the stem is nearly to completely hairless
- Stem orientation
- the stems are upright
- Stem spacing
- the stems grow close together in compact clusters or tufts
Wetland status
Usually occurs in non-wetlands, but occasionally in wetlands. (Wetland indicator code: FACU)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Massachusetts
- unranked (S-rank: SNR)
ssp. nodosum
- Massachusetts
- unranked (S-rank: SNR)
ssp. pratense
- Massachusetts
- unranked (S-rank: SNR)
From Flora Novae Angliae dichotomous key
3. Phleum pratense L. E
common Timothy. Phleum nodosum L.; P. pratense L. var. nodosum (L.) Huds. • CT, MA, ME, NH, RI, VT; nearly throughout. Fields, roadsides, and other open, human-disturbed or human-maintained sites.