- You are here:
- Dichotomous Key
- Poaceae
- Poaceae Group 6
- Spartina
- Spartina alterniflora
Spartina alterniflora — smooth cordgrass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Smooth cordgrass is the dominant grass species in salt marshes and coastal beaches of the Atlantic and Gulf coasts. It is also used extensively for coastal erosion control. It has been introduced to other parts of the world, including the west coast of the United States, where it is a threat to the native coastal plant communities.
Habitat
Brackish or salt marshes and flats, coastal beaches (sea beaches), marshes, wetland margins (edges of wetlands)
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
-
- aquatic
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Leaf blade width
- 3–25 mm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Spikelet length
- 8–14 mm
- Glume relative length
- both glumes are as long or longer than all of the florets
- Awn on glume
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 1–2 mm
- Anther length
- 3–6 mm
-
Flowers
- Anther length
- 3–6 mm
- Anther number
- 3
- Awn on glume
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is thin and flexible
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0 mm
- Glume keel
- the glume keels are smooth and hairless
- Glume relative length
- both glumes are as long or longer than all of the florets
- Glume shape
- the glume is V-shaped in cross-section
- Glume veins
- 1
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis orientation
- the inflorescence axis is straight
- Inflorescence branch length
- 5–15 cm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Inflorescence branches coming off the lowest stem node
- 1
- Inflorescence crowding
- the panicle is somewhat to very spread out, with clearly-evident branches
- Inflorescence length
- 100–400 mm
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- NA
- Lemma awn coiled
- NA
- Lemma awn length
- 0 mm
- Lemma awn number
- the lemma has no awn
- Lemma awn orientation
- NA
- Lemma cross-section
- the lemma is V-shaped if you cut across the midpoint
- Lemma hairs
- the lemma is hairless between the veins
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is a simple point, with or without an awn (long narrow extension ending in a point)
- Lemma tip shape
- the lemma tip tapers to a long narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
-
- 1
- 3
- Lower glume length
- 4–10 mm
- Lower glume relative length
- the lower glume is one third to three quarters as long as the upper glume
- One or more florets
- there is one floret per spikelet
- Palea length
- 10–12 mm
- Palea relative length
- palea is longer than lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis length
- 0 mm
- Spikelet axis tip
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off below the glumes
- Spikelet length
- 8–14 mm
- Spikelet number per node
- 0
- Spikelet pedicel
- the spikelets do not have pedicels
- Spikelet pedicel length
- 0 mm
- Spikelet position
- the spikelets emerge from both the upper and lower halves of the inflorescence branches
- Spikelets per panicle branch
- 10–30
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 8–14 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
-
Growth form
- Horizontal rooting stem
- no
- Lifespan
- the plant lives more than two years
- Rhizomes
- yes
- Roots
- the plant has rhizomes (horizontal underground stem with roots growing from it)
-
Leaves
- Basal leaves
- the plant has few or no leaves coming from the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf blade cross-section
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
-
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- the leaf blade is hairy
- Leaf blade length
- Up to 60 cm
- Leaf blade texture
-
- the leaf blade is rough and sandpapery
- the leaf blade is smooth, or it may have soft hairs
- Leaf blade width
- 3–25 mm
- Leaf ligule length
- 1–2 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane with fine hairs
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
-
Place
- Habitat
-
- aquatic
- wetlands
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Specific habitat
-
- brackish or salt marshes and flats
- edges of wetlands
- marshes
- sea beaches
-
Stem, shoot, branch
- Hairs at nodes
- the stem nodes are hairless or they have very sparse hairs
- Plant height
- 20–250 cm
- Stem hairs
- the stem is nearly to completely hairless
- Stem orientation
- the stems are upright
- Stem spacing
-
- the stems grow close together in compact clusters or tufts
- the stems grow singly or a few together (they may form diffuse colonies)
- Stem thickness at base
- 0.3–20 mm
Wetland status
Occurs only in wetlands. (Wetland indicator code: OBL)
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- absent
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Massachusetts
- unranked (S-rank: SNR)
From Flora Novae Angliae dichotomous key
1. Spartina alterniflora Loisel. N
smooth cordgrass. Spartina alterniflora Loisel. var. glabra (Muhl. ex Bigelow) Fern. • CT, MA, ME, NH, RI. Saline marshes, Atlantic coast beaches and strands.
Native to North America?
Yes
Sometimes confused with
- Spartina pectinata:
- leaves prominently scabrous and rhizome light brown to purple-brown when fresh (vs. S. alterniflora, with leaves smooth or slightly scabrous along apical margins and rhizome white when fresh).
Synonyms
- Spartina alterniflora var. glabra (Muhl. ex Bigelow) Fern.