- You are here:
- Full Key
- Grass-like plants
- True grasses
- Piptatherum pungens
Piptatherum pungens — short-awned mountain-rice grass
Copyright: various copyright holders. To reuse an image, please click it to see who you will need to contact.
Facts
Short-awned mountain-rice grass is a native grass of deciduous or mixed evergreen-deciduous woodlands and barrens and dry openings. It is present in all New England states, though rare in some.
Habitat
Anthropogenic (man-made or disturbed habitats), cliffs, balds, or ledges, forests, grassland, ridges or ledges, woodlands
New England distribution
Adapted from BONAP data
Native: indigenous.
Non-native: introduced (intentionally or unintentionally); has become naturalized.
County documented: documented to exist in the county by evidence (herbarium specimen, photograph). Also covers those considered historical (not seen in 20 years).
State documented: documented to exist in the state, but not documented to a county within the state. Also covers those considered historical (not seen in 20 years).
Note: when native and non-native populations both exist in a county, only native status is shown on the map.
Found this plant? Take a photo and post a sighting.
Characteristics
- Habitat
- terrestrial
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Leaf blade width
- 0.5–1.8 mm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Spikelet length
- 3.5–4.5 mm
- Glume relative length
-
- both glumes are as long or longer than all of the florets
- neither glume is quite as long as all of the florets
- Awn on glume
- the glume has no awn
- One or more florets
- there is one floret per spikelet
- Lemma awn length
- 0–2 mm
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf ligule length
- 0.5–2.5 mm
- Anther length
- 0.8–1.8 mm
-
Flowers
- Anther length
- 0.8–1.8 mm
- Anther number
- 3
- Awn on glume
- the glume has no awn
- Bristles below spikelets
- no
- Floret lower bract texture
- the lemma is hard and firm
- Floret number
- 1
- Floret types within spikelet
- all the florets within a spikelet are similar
- Glume awn length
- 0 mm
- Glume keel
-
- the glume keels are rough or hairy
- the glume keels are smooth and hairless
- Glume relative length
-
- both glumes are as long or longer than all of the florets
- neither glume is quite as long as all of the florets
- Glume veins
-
- 1
- 3
- 5
- Glumes per spikelet
- 2
- Inflorescence arrangement
- the spikelets are uniform
- Inflorescence axis orientation
-
- the inflorescence axis is arched or curved outward
- the inflorescence axis is straight
- Inflorescence branch length
- 0.8–4 cm
- Inflorescence branches
- the flowers are attached to branches rather than to the main axis of the inflorescence
- Inflorescence branches coming off the lowest stem node
- 1–2
- Inflorescence crowding
-
- the panicle is somewhat to very congested (crowded), and the branches may not be clearly seen without close inspection
- the panicle is somewhat to very spread out, with clearly-evident branches
- Inflorescence length
- 40–60 mm
- Inflorescence type (general)
- the spikelets are borne on stalks or on branches
- Inflorescence type (specific)
- the inflorescence is branched, and the branches do NOT both grow from the same side of the plant AND look like spikes
- Inforescence position
- the spikelets are mainly carried at the end of the stem
- Lemma awn base
- the awn is attached right at the tip of the lemma
- Lemma awn coiled
- the lemma awn is straight or twisted, but not coiled one half turn
- Lemma awn length
- 0–2 mm
- Lemma awn number
-
- the lemma has no awn
- the lemma has one awn on it
- Lemma awn orientation
-
- the awn of the lemma is straight
- the awn of the lemma on dried or older plants is curved or bent outwards
- Lemma base hairs
- the lemma has hairs at the base
- Lemma base length
- 0.2–0.3 mm
- Lemma cross-section
- the lemma is flat or rounded if you cut across the midpoint
- Lemma hairs
- the lemma has fine hairs between the veins
- Lemma keel hairs
- NA
- Lemma marginal vein hairs
- the marginal vein of the lemma has fine hairs on it
- Lemma surface
- the surface of the lemma is relatively smooth (not counting any longitudinal veins or hairs)
- Lemma tip
- the lemma tip is a simple point, with or without an awn (long narrow extension ending in a point)
- Lemma tip shape
- the lemma tip tapers to a narrow point (it may or may not also have an awn or teeth at the tip)
- Lemma vein number
-
- 3
- 5
- 7 or more
- Lower glume length
- 3.5–4.5 mm
- Lower glume relative length
- the lower glume is nearly as long, or as long as, the upper glume
- One or more florets
- there is one floret per spikelet
- Palea relative length
- palea is one half to fully as long as lemma
- Reproductive system
- all the flowers on the plant have both carpels and stamens (synoecious)
- Spikelet axis tip
- there is no extension of the spikelet axis beyond the tip of the spikelet
- Spikelet disintegration
- the spikelet breaks off above the glumes, so that after the florets fall off, the glumes remain
- Spikelet length
- 3.5–4.5 mm
- Spikelet number per node
- Up to 0
- Spikelet pedicel
- the spikelets have pedicels
- Spikelet position
- the spikelets emerge mainly from the upper halves of the inflorescence branches
- Spikelet shape
-
- the spikelets are elliptic (widest in the middle, tapering to the ends) in profile
- the spikelets are lanceolate (lance-shaped, widest below the middle and tapering narrowly to the ends) in profile
- Spikelets spiny
- the spikelets do not appear spiny
- Tip of glume
-
- the tip of the glume is divided into two or more points
- the tip of the glume is not divided (though it may have an awn on it)
- Upper glume length
- 3.5–4.5 mm
- Upper glume relative length
- the upper glume is more than one half as long as the lowest lemma
- Upper glume shape
-
- the upper glume is widest above the middle
- the upper glume is widest at or below the middle
-
Growth form
- Lifespan
- the plant lives more than two years
- Rhizomes
- no
- Roots
- there are only slender roots on the plant
-
Leaves
- Basal leaves
- the plant has large or prominent tufts of leaves at the base of the flowering stem
- Leaf auricles
- the leaves do not have auricles
- Leaf basal lobe hairy
- NA
- Leaf blade cross-section
-
- the leaf blade is clearly folded or rolled inwards
- the leaf blade is more or less flat in cross-section, or slightly folded or rolled inwards
- Leaf blade hairs
- the leaf blade is hairless, but it may have tiny prickles that give it a sand-papery feel
- Leaf blade length
- 6–45 cm
- Leaf blade texture
- the leaf blade is smooth, or it may have soft hairs
- Leaf blade width
- 0.5–1.8 mm
- Leaf ligule length
- 0.5–2.5 mm
- Leaf ligule type
- the leaf ligule is in the form of a membrane
- Leaf margin glands
- there are no glands along the edges of the leaf blade
- Leaf sheath closed around stem
- the margins of the leaf sheath are overlapping and not fused together except in the basal half (or less)
- Leaf sheath hair type
- there are no hairs on the surface of the leaf sheath
- Leaf sheath hairs
- there are no hairs on the surface of the leaf sheath
- Orientation of topmost leaf
- the flag leaf is held upright, or at less than a 45 degree angle out from the stem
-
Place
- Habitat
- terrestrial
- New England state
-
- Connecticut
- Maine
- Massachusetts
- New Hampshire
- Rhode Island
- Vermont
- Specific habitat
-
- cliffs, balds, or ledges
- forests
- grasslands
- man-made or disturbed habitats
- ridges or ledges
- woodlands
-
Stem, shoot, branch
- Plant height
- 10–90 cm
- Roots at lower stem nodes
- no
- Stem hairs
-
- the stem has hairs on it
- the stem is nearly to completely hairless
- Stem node number
- 1–6
- Stem orientation
- the stems are upright
- Stem spacing
- the stems grow close together in compact clusters or tufts
Wetland status
Not classified
In New England
Distribution
- Connecticut
- present
- Maine
- present
- Massachusetts
- present
- New Hampshire
- present
- Rhode Island
- present
- Vermont
- present
Conservation status
Exact status definitions can vary from state to state. For details, please check with your state.
- Connecticut
- extremely rare (S-rank: S1), endangered (code: E)
- Rhode Island
- extremely rare (S-rank: S1), concern (uncertain) (code: C*)
- Vermont
- rare (S-rank: S2), threatened (code: T)
Native to North America?
Yes